Dental Abutments
Dental Abutments
Abutment Internal Hexagon W(wide) Dental
2703011
∅ shoulder: 5,4 mm
h vert.: 4,8 mm
h min: 1,0 mm
№1
Abutment Internal Hexagon W(wide) Dental
2703021
∅ shoulder: 5,4 mm
h vert.: 4,8 mm
h min: 2,0 mm
№2
Dental Abutments
Internal hexagon
• аbutments can be easily adapted to any clinical situation
• can be milled for individualization purposes
• for cement-retained restorations
• guiding hexagon is used for simple and precise positioning
IMPORTANT!
Design of prosthetic connection
Internal hexagon connection is used for reliable fixation of various abutments types. This type of implant/abutment connection contributes to perfect, sealed and stable fit, which excludes bacterial invasion, uniformly distributes occlusal forces and virtually excludes any micro-movements.
Standard platform
The size of internal prosthetic connection is standard for all four diameters of Dental and Dental plus Implants.This allows fixation of all straight and angled Dental abutments, and implant walls remain strong enough with this type of connection, being able to withstand direct loads. Use of angulated abutment is recommended in situations when implant was placed at more than 15° angle to tooth long axis. Burn-out plastic abutment is used for individual abutment fabrication by dental technician. Shoulderless abutment and burn-out plastic abutment is used for individual abutment fabrication by dental technician. Individual abutment (consists of base titanium part and burn-out plastic coping) is used as a base for individual zirconia abutment for cementretained restorations (metal-metal).
Surface coating
Vacuum arc technique of surface coating (titanium-nitride coating) is used, which is characterised by high adhesion properties and mechanical strength, resistance to friction wear and influence of atmospheric air, aggressive environments, erosion.
Markings
Abutment markings correspond to the height of subgingival part, which facilitates the choice of abutment type (pitch is 1 mm).